Brunton Wind River Range – Camp Stove – Tear Down Review

Spending weeks relying on a Colman LP camp stove for cooking led me to look for a better solution. Our Colman stove was great when you needed a hot burner, however, it was not possible to adjust the burners low enough to simmer.  I tend to cook meals similar to what I cook at home so a good stove is essential. I am tired of the stove dictating what I can cook.

Time to step up to a gourmet camp stop. Enter the Brunton Wind River Range. This stove is considered the Cadillac of camp cook stoves with controls and function like a home range.

With the new stove in hand I decided this would be a good time to do a full tear down review.  By totally disassembling the stove I am able to discuss the construction as well as take  large number of photos so others can see the quality.

The Stove Ready To Go

Stove setup and ready to cook

The stove is constructed of extruded and stamped aluminum parts which are bolted together using stainless steel screws. Tearing the stove down took me all of  10 minutes.  This would lead to easy replacement of damaged parts.

Burner construction

Aluminum Valve Mount

The burner valve assembly is made from brass with a polymer knob and is mounted to an aluminum extruded member.

Tank Hose Attachment

The attachment for the hose is again constructed of brass and is mounted so when the hose is tightened the tubing connecting to the burner valves are not stressed.

Mounted Valve Assembly

p42814891

Brass Valve Jet

 

 

Steel Burner Mounting Plate

 The burners are mounted to a sturdy steel plate with a spring between the burner and the steel plate. This spring allows the burner tube to move when the burner assembly is installed in the stove.

The burner tube appears to be constructed of stainless steel

 

Burner assembly is installed in the stove the burner tubes line up right in front of the valve jets

 

Stove Body Construction

End view of the Extruded Front Member

 

Front with valve assembly attached

 The front and back members of the case are constructed of durable extruded aluminum with the sides being constructed of thick stamped and formed aluminium.   

Stamped Aluminum Side Member

 

Hing Mounted on side plate

 

Aluminum insert for both bottom and top

 The bottom and top have a filler that is a sheet of aluminum. The edges of this sheet have stamps in them which provide a tighter fit.

 

Front and Back with bottom in place

 

End plate in place

 

Corner part

 The corners of  both the top and bottom are made of a durable polymer piece that is fitted to the corners and bolted on.

Close up of Front corner

 

Closeup of back Corner

 

Top view of grill mount

 

Side View of Grill Mount

 

Stove with Grill in place

 The grill is VERY heavy duty and is attached to the stove with four tabs that it firmly fits under. To remove the grill it must be lifted then slid forward. No need to worry about the grill moving during use and it will support the heaviest pots you will want to use.

Wind Screens

 

Front view with wind screens installed

 

Side view of wind screens

The wind screens are made of stainless steel and attach to the stove in such a way that very little wind will be able to enter the stove from the sides or back. The wind screens do not have to be used if there is no wind. They store in the cordura pouch that comes with the stove. 

Hose and Wind Guards stowed under burner plate.

 The hose also fits in the cordura pouch to protect the regulator and fittings. There is a small adapter that can be used if you want to run the stove of the small green camp fuel bottles. I imagine that if you use these small bottles you will be able to empty one during a single use of the stove.

Storage space in Case Cover

There is LOTS of storage space in the top of the stove. This can be used for cooking utensils as well as other stuff. I keep my griddle stowed here. Brunton makes a sink that kits in this space.

My Griddle stored in top of case

 

Cutting Board in place

 The stove comes with a heavy duty cutting board that is stowed in the top using two latches. The board will hold any items stored underneath in place when opening the stove up.

Close up of latch

 

Case Latches Engaged

 

The stove is closed with two heavy duty latches which should hold up to years of abuse.

I am looking forward to our first trip where I will be able to put the stove through its paces. Look for follow up post on the stoves performance.

tomas

Tomas has lived in Colorado since age 5. Having grown up on the Western Slope of Colorado lots of time was spent in the Desert Southwest. Tomas' father introduced him to the love of 4 wheeling at an early age in the high mountains around Aspen, Colorado. While an avid Mountain Biker, Tomas and his Family enjoy adventures in the mountains and desert in the remote locations that can only be reached by 4wd. Day hikes are always a must when on the family trips. While enjoying outdoor activities he wants to share his love as a certified 4wd trainer and ski instructor. Tomas also enjoys caving and cave exploration. Tomas currently resides in Colorado Springs. 

Tags:

  20 comments for “Brunton Wind River Range – Camp Stove – Tear Down Review

Leave a Reply to fubar Cancel reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.