In our Toyota FJ Cruiser build there is not much room for the installation of a CB radio. We also only use the CB during trail runs when others do not have a HAM radio. With this in mind I selected a the Cobra 75 WX ST for installation in our FJ. The Cobra 75…
Modifications
I have worked to document all the modification that I have made to my FJ Cruiser. If you are unable to find a specific type of mod try using the search box.
Getting Trail Ready, Miscellaneous
Custom Trailer Hitch
by tomas •
Our M416 adventure trailer is a key part of our off road adventure gear. The trailer uses a lunette and pintle hitch. On our old build I used a normal receiver hitch that hung below the rear bumper. The receiver was the lowest point on the rear bumper and was always getting hung up. For…
Interior
New Seat Covers for the White Knight
by tomas •
The stock seat covers in the Toyota FJ Cruiser do not hold up well to heavy use. In our last build I installed Wet Okole seat covers and I was very pleased with their performance. For the White Knight I chose a seat cover that would add a little personality to the interior of the…
Electronics, Electronics
Onboard Computer Installed
by tomas •
In our previous Toyota FJ Cruiser build, the on board computer was an essential part. I used the computer for on and off road navigation, weather radar, and internet access. For our new FJ Cruiser, the White Knight, I was able to reuse most of the previous system. The original build includes the following hardware:…
Lighting
Golight Stryker HID installed
by tomas •
On our old Toyota FJ Cruiser I ran 2 Golight Strykers mounted on the roof rack. I had intended to use these lights as off road lights but they did not function well for this. One of the lights has been upgraded to HID and the beam is very concentrated. This works well as a…